Injector Adaptor

This adaptor allows you to connects LS2/L98 injectors to LS1 engine managment harness.

Features: Fully plug and play Weatherproof sealed connectors Automotive-grade 16 gauge TXL wire Color coded wiring Heatshrink jacket CQM assembly * Circuit tested

Cam Sensor Adaptor Harness

This harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2/L98 motor conversions.

Features: - Fully Plug and Play with the factory connector & sensor - High-quality TXL automotive wire - High-temperature (300F) Nylon loom remains flexible while not melting sitting on top of the motor - All connections crimped and soldered

Knock Sensor Relocation Harness

This harness allows the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2/L98 block and plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds.

Features: - Fully Plug and Play with the factory harness & sensors - Military spec high-temperature Teflon wire (same type used on oxygen sensors) - High-temperature (1200F) heat treated fiberglass protective loom
All connections crimped and soldered

Map Sensor Extension